The GLOSS-15-60° gloss rate sensor for inline gloss measurement is suitable for matt materials, such as paper and cardboard. The sensor is equipped with as well 0-10 Vdc as 4-20 mA output and RS232 interface.
The GLOSS-15-60° gloss rate sensor for inline gloss measurement is suitable for matt materials, such as paper and cardboard (TAPPI standard, paper industry) and has a working distance of 15 mm with a tolerance of +/- 10%. The sensor meausures gloss units (GU). Depending on the type of sensor from the GLOSS series and the material you measure, Gloss Units are measured between 0 and 100 GU.
The sensor is delivered including software for Windows® for setting purposes. You can teach up to 7 gloss rates. Via an analogue output (0-10 Vdc/4-20 mA) the Gloss Units are send out. Furthermore, a RS232 interface is available for data exchange. When using an Ethernet interface, you can use cab-usb4/ETH for converting the RS232 signal to Ethernet. The cab-usb4/USB convertor is used for connecting to a computer via USB.