Light curtains for elevators

Telco Sensors is well-known in the market for thier comprehensive package of high quality light curtains for elevators. Nothing or nobody will get stuck between elevator doors when Telco lights curtains are applied. The high density of infrared light beams in the standalone light curtains provide a safe detection of persons, animals and objects. The compact shape of the aluminum profiles ensures discreet installation, even in applications with limited space available.

The Telco Sensors SG2 series light curtains can be used on static as well as dynamic installations. The patented AST (Automatic Signal Tracking) function automatically compensates the sensitivity based on the distance between the transmitter and receiver or any misalignment of the light curtains.
 
Static application

Dynamic application
Application with blanking function


By default, the light curtains are delivered in 200 cm or 210 cm profile height (other lengths on request) and are available in a slimline or leading edge housing.
The blanking function can be used to disable the light beams that are covered by objects that are structurally located in the detection field of the light curtain.
The light curtain is equipped with a solid state relay output, which allows the output signal to be applied to any type of control. Sensor Partners delivers special versions of the Telco Sensors light curtains approved by Belgian KB. We can also supply the right mounting accessories, LED strips or LED profiles. For more information, please contact one of our consultants.

Download the available data sheets and manuals below:

 Series  Datasheet    Manual  
 SG1 standalone light curtains  click here  click here
 SG2 standalone light curtains  click here  click here
 SG11 light curtains with seperate controller    click here  
 SGC 1 transformer  click here  click here
 SGC 11 controller  click here  click here
 SG-LS LED-profiles  click here  
 SG-LS LED-kits  click here  
SG11 - 200/210 cm

SG11 - 200/210 cm

Light curtain set for elevators, profile height 200 cm or 210 cm. Leading edge or slim line housing. Meets the EN 81-20. Works in conjunction with SGC 11 controllers.
SG2 - 200 cm

SG2 - 200 cm

Light curtains for elevators, profile height 200 cm. Leading edge and slim line housing. Standard, with electrical synchronization or with OSE output. EN 81-20 compliant.
SGC 1 A 500

SGC 1 A 500

The SGC 1 A 500 is used in conjunction with the SG2 or SG10 light curtain sets when 230 Vac is present and a relay must be connected immediately (max. 3A). In addition, the SGC 1 A 500 is equipped with time-out output and time-delay potentiometer...
SGC 1 B 500

SGC 1 B 500

The SGC 1 B 500 can be used in conjunction with the SG2 or SG10 light curtain sets when it is desirable to use 230Vac power supply and switch a relay directly from the SGC (max. 3A).
SGC 11 controller

SGC 11 controller

The SGC 11 is to be used in conjunction with a set of light curtain transmitter detector SGT and receiver detector SGR, from the SG 11 series.
SMM 01 4033L S50P 5

SMM 01 4033L S50P 5

Doppler radar sensor for detection of persons and objects in front of doors, elevators and escalators. Using the newest technology, equipped with direction detection and slow/fast moving filters.