Controllers that are intended for use with Telco light curtains.

Filter products Showing all 7 results
Characteristics
Sealing class
Power supply

i-Tec touchscreen terminal

432,00

6-Channel touchscreen terminal with temperature monitors, alarms, sensor configuration and data-logging for i-Tec Mini or MiniBus sensors. Possible to configure with up to 6 i-Tec Mini or MiniBus pyrometers.

SGC 1 A 500

The SGC 1 A 500 is used in combination with the SG2 or SG10 light curtain sets when 230 Vac is present and a relay must be switched immediately (max. 3A). In addition, the SGC 1 A 500 is equipped with a timeout output and a time delay potentiometer.

SGC 1 B 500

The SGC 1 B 500 can be used in combination with the SG2 or SG10 light curtain sets when it is desirable to use 230 Vac supply voltage and directly switch a relay from the SGC (max. 3A).

SGC 11 A 3K0

The SGC 11 A 3K0 controller must be used in combination with the SG11 light curtain transmitter and receiver. SGC 11 A 3K0 is equipped with alarm and time-out function.

SGC 11 A 500

The SGC 11 A 500 controller must be used in combination with the SG11 light curtain transmitter and receiver. SGC 11 A 500 is equipped with sensitivity adjustment.

SGC 11 A 7S0

The SGC 11 A 7S0 controller must be used in combination with the SG11 light curtain transmitter and receiver. SGC 11 A 7S0 is equipped with double safety relays and force guided contacts. Also available in ATEX edition (Ex II 3G Ex nA IIC T6 Gc).

SGC 11 A 7S0/IP65

SGC controller for SG11 light curtains in IP65 housing with double safety relay and force guided contacts.