An accurate or reliable measurement requires a steady mounting of the sensors that also has to be resistant to environmental impacts and influences.

Filter products Showing 1 - 24 of 41 results
Housing
Characteristics
Material

ABF mounting bracket

30,79 37,26 incl. btw

The adjustable mounting bracket consists of a right-angled mounting bracket with another L-shaped bracket. When mounted as shown in the figure, the mounting bracket provides firm support for the sensor.

Adjustable mounting bracket ABL

39,00 47,19 incl. btw

The adjustable mounting bracket consists of a right-angled mounting bracket with another L-shaped bracket. When mounted as shown in the figure, the mounting bracket provides firm support for the sensor.

Adjustable mounting bracket ABS

29,50 35,70 incl. btw

The adjustable mounting bracket consists of a right-angled mounting bracket with another L-shaped bracket. When mounted as shown in the figure, the mounting bracket provides firm support for the sensor.

BF-12-04

5,25 6,35 incl. btw

Stainless steel mounting bracket for an M12 sensor.

BF-18-02

12,50 15,13 incl. btw

Steel mounting and adjustment bracket for Ø 20mm/M18 sensors. Complete with M12 bolt, washers and nuts.

BF-18-04

6,15 7,44 incl. btw

Stainless steel mounting bracket for an M18 or Ø20 sensor. Including mounting material.

BF-30

9,90 11,98 incl. btw

Plastic clamp for M30 or Ø34 sensor.

BF-30-02

12,50 15,13 incl. btw

Steel mounting and adjustment bracket for Ø 30mm/M30 sensors. Complete with M12 bolt, washers and nuts.

BF-30-04

7,60 9,20 incl. btw

Angled mounting bracket for M30 sensors in stainless steel 304.

BF-pms/A1

86,35 104,48 incl. btw

Connection swivel for PMS ultrasonic sensors type A. Hygienic Design, ECOLAB, EHEDG (TYPE EL Class I AUX).

FBC mounting bracket

39,00 47,19 incl. btw

The L-shaped stainless steel mounting bracket ensures a sturdy mounting of the i-Tec sensor. The sensor can be aligned around 1 axis through the slotted holes. The mounting bracket is compatible with the following variants of the i-Tec-Cube: GH, SXA, MA.

FBCA mounting bracket

39,00 47,19 incl. btw

The L-shaped stainless steel mounting bracket ensures a sturdy mounting of the i-Tec sensor. The sensor can be aligned around 1 axis through the slotted holes. The mounting bracket is compatible with the following variants of the i-Tec-Cube: GH, SXA, MA.

FBF mounting bracket

13,00 15,73 incl. btw

The angled stainless steel mounting bracket ensures a firm mounting of the i-Tec sensor. The sensor can be aligned around 1 axis through the slotted holes.

FBL mounting bracket

12,50 15,13 incl. btw

The angled stainless steel mounting bracket ensures a firm mounting of the i-Tec sensor. The sensor can be aligned around 1 axis through the slotted holes.

FBN mounting bracket

19,11 23,12 incl. btw

The angled stainless steel mounting bracket ensures a firm mounting of the i-Tec NFC sensor. The sensor can be aligned around 1 axis through the slotted holes.

FBS mounting bracket

12,50 15,13 incl. btw

The angled stainless steel mounting bracket ensures a firm mounting of the i-Tec sensor. The sensor can be aligned around 1 axis through the slotted holes.

H0-40-20

40,00 48,40 incl. btw

H0-40-20 is an aluminum mounting bracket for ZM18/Ø40mm lasers.

H2-20

35,00 42,35 incl. btw

H2-20 is an aluminum mounting bracket, tiltable and slidable through the slotted holes, especially for Z-Laser ZM18 / Ø20mm lasers, but can also be used for sensors with an M18 or Ø20mm housing.

H2-40

45,00 54,45 incl. btw

H2-40 is an aluminium tilting mounting bracket that is slidable because of the slotted holes and is suited for ZM18/Ø40mm lasers.

H3-11

15,00 18,15 incl. btw

Plastig mounting bracket on ball joint for Ø11 mm lasers

H6-20

260,00 314,60 incl. btw

Mounting and adjustment bracket for ZM18/Ø20 projection lasers. Extremely accurate adjustment possible through a hex key.