Infrarood Time of Flight afstandssensoren

The SPTF 3000 series is a high performance Time-of-Flight measurement sensor line housed in a compact rectangular housing, with a 5 m cable connection. The sensors are available with or without analogue output, and with either two NPN or two PNP transistor outputs. The unit is calibrated using two teach-in push buttons and two rotary selectors, located on the top control panel. The teach-in function sets the interval of the range measurement: distance point that corresponds to 0V/4mA and distance point that corresponds to 10V/20mA. The teach-in is also used to set the distance points at which each of the digital output switches. The two digital outputs can be used to set a ‘high’ (near distance point) and a ‘low’ alarm (far distance point). The outputs can also be configured to indicate whether an object is inside or outside a set range interval. The control input enables the teach-in calibration to be set remotely. The sensitivity and response time of the sensor is selected via a 3-position rotary mode selector. The current output, 4-20 mA, or voltage output, 0-10 V, is selectable by a rotary selector. The range is 6 m against an A4 white paper target and up to max. 15m against 1 m2 or larger, white target.

In verband met de feestdagen zijn wij gesloten van 24-12-2018 t/m 01-01-2019, de laatste zendingen vinden plaats op 20-12-2018. Vanaf 02-01-2019 staan wij weer voor u klaar. Wij wensen u prettige feestdagen en een gelukkig nieuw jaar!
Artikelen worden geladen
SPTF 3215 5

SPTF 3215 5

Time-of-flight afstand sensor in compacte 50x50 mm behuizing met een maximaal bereik van 15 meter en een analoge 4-20 mA en 0-10 Vdc uitgang.